Feasa Opβ₩tical Heads現(xiàn)貨 Feasa Optica≈≥l Heads現(xiàn)貨 =================Ω↓₩β============= ※※※ 深圳市高元寶貿易有限公司 α<✘ ※※※ 張瑞 188-24-24-3080（ε✘V同） ※※※ Q：306-167-1820 ===========≤π₩©=================== ✘​ ↔ The Feasa Optical Hea™±'ds have been designed to ensure stabi↔£→lity when testing the β$ ‌intensity of LEDs. The € robust and compact desig✔↔n delivers consistent and©±∑ repeatable readings with a <10% int₹§"≈ensity change over a 1mm ←π‍placement of the LED. The Optical H≥ ead addresses the following issu''✔es: Compensation for LED Placement σ☆"±Repeatable Intensity Readings Reduced ÷•↓sensitivity to ambient light ©≤ Product Number Product Uα↔π♣ses OH-1 This can be use "×d when LEDs are locate↓"∏d as close as 3.55mm centr∞↕e to centre on a PCB. ש OH-2S This can be usedσ®₽ when there are fixturi↓&&ng height restrictions as it is♣₽‍☆ only 30mm in length. ∏✔ OH-3 Our standard Optic€πal Head and is suitable for‌ε≥ most applications with a ce≤‍→ntre to centre dista™←nce of 5mm. OH-4 ∑λ Ideal for testing©•↑ 90° or side emitting LEDs. OH-5 ↑≥♦∞ Is used when LEDs are as c€ &lose as 4.00mm centre to centre onΩβ™∏ a PCB. OH-6 Has a lar←¥ge diameter, 8.00mm and is λ∑used with large diam$σ¶eter LEDs. Designed for testing Hi ♣£>gh Brightness LEDs and LEDs with a la₽♥α™rge diameter, particularly suitabl™✔e for Daytime Running LighΩ↓ts. OH-7LT Is design'∏ed to be used in an oven βΩ♣with the LED Life Tester. The temperatu​↓re range of this Optica‌≈Ωl Head is -65°C to +125°C.  α " OH-8IR Is designed to test the↓♦ Intensity of Infrared LEDs in co↔‍÷¶njunction with the IR LED Analys↑↑↔πer. OH-9RF Suita☆₽ble for use in RF environments. O≠∑≤H-10 Suitable for high bright L÷γ•EDs on close centres; 1.3mm λ&↕©centre to centre. OH-11 Suit ‍$εable for high bright LEDs on very cl≥π↔ose centres; 1.0mm centre to centre. ↕£ OH-13 Ideal fλ™÷γor testing Low Light σ$ LEDs particularly suitable forγλ Backlight Switches and Panels. Design♣∑✘ed for 2.2mm fiber to be used i↓®¶↑n conjunction with the Low Light Analysβ•er. This requires epoxy to att>πach the fiber to the Opt&✘ical Head. OH-14 σ​₹ Ideal for testing 90° or side emitti ≤ng Low Light LEDs particularly sui✘>★→table for Backlight Switches and Pa¥™↔♥nels. Designed for 2.2mm fiber to be"δ↓π used in conjunction with the Low Light≠≈δ Analyser. This requires epoxy to attaδ '$ch the fiber to the Optical H<♠® ead. OH-16 Ideal™∏↑​ for testing low lig☆€★£ht LEDs or LEDs with a large dia≤⧙meter, particularly suitable for B ♦acklight Switches and Panels. Designed ¶₽for 2.2mm fiber to be used in conj✔±↓unction with the Low≈δ♠≤ Light Analyse  ×Feasa3-F Feasa 5-F Feasa 10-F∏σ₹← Feasa 20-F Feasa OH-3 δ∞✘ Feasa OH-10 Feasa OH$φ-8 Feasa OH-2 Feasa OH-5 Feasa OH ∞∑-4 FeasaOH-1 ↕✔↑